- Free delivery in Accra and Tema
- Genuine Apple warranty & Support
- Sealed, genuine Apple stock
Ubiquiti
UniFi E7 Audience
An indoor/outdoor WiFi 7 access point for crowds of 1,500+.
Only 5 left in Accra
₵25,399
Delivery or pickup
UniFi E7 Audience—
₵25,399
- Free delivery in Accra and TemaTracked to your door, with a delivery code on handover.
- Sealed, genuine Ubiquiti stockNever refurbished, never opened, serial on the box.
About the UniFi E7 Audience
Built for crowds: stadiums, conference halls, churches and event grounds. The E7 Audience runs 12 spatial streams on 5 GHz and two 6 GHz radios, with a selectable beamforming antenna to size each cell, and serves 1,500+ devices.
It is IP68 waterproof and mounts on a wall or pole. It has no 2.4 GHz radio, and its 6 GHz radios work only where local rules allow; plan the site with that in mind. Needs PoE++ (51 W).
- 5 GHz and 6 GHz only (no 2.4 GHz)
- 10 GbE uplink, PoE++ powered
Full specification
7 sectionsWiFi
- WiFi standard: WiFi 7 with 6 GHz support (5 GHz + two 6 GHz radios; no 2.4 GHz)
- Spatial streams: 12
- MIMO: 6 GHz low band 4 x 4, 6 GHz high band 4 x 4, 5 GHz 4 x 4 (DL/UL MU-MIMO)
- Max. data rate: 6 GHz 11.5 Gbps per band (BW320); 5 GHz 8.6 Gbps (BW240)
Antennas and coverage
- Coverage area: 465 m² (5,000 ft²)
- Selectable directional antenna: 15 dBi, 50° x 50° or 11 dBi, 90° x 90° (5 and 6 GHz)
- Max. client count: 1,500+
- PRISM RF filtering: Yes
Uplink and power
- Networking interface: (1) 10 GbE RJ45 port / (1) GbE RJ45 port
- Power method: PoE++
- Supported voltage range: 42.5–57V DC
- Max. power consumption: 51W
Mounting and weatherproofing
- Mounting: Wall, pole (mounts included); VESA (optional)
- Pole mount diameter: 25–76 mm (1–3")
- Weatherproofing: IP68
- Ambient operating temperature: -40 to 60° C (-40 to 140° F)
Physical
- Dimensions: device 474.1 x 265.5 x 42.2 mm (18.7 x 10.5 x 1.7"); bracket 150.4 x 113.6 x 125 mm
- Weight: device 3.3 kg (7.3 lb); with mount 4.3 kg (9.5 lb)
You will also need
- A PoE++ (802.3bt) power source: a PoE++ (802.3bt) switch port or PoE++ (802.3bt) injector (not included)
- A UniFi gateway / Cloud Gateway or UniFi Network application (UniFi Network 9.2.87 or later) to adopt and manage it
- An Ethernet cable run to the mounting point (not included)
- A 10 GbE-capable switch port to use the full 10 GbE uplink
- Outdoor-rated (shielded) Ethernet cable for exposed runs (not included)
Good to know
- 6 GHz WiFi works only where local regulations allow it; elsewhere the device runs on its other bands.
In the box
- E7 Audience access point (with cable glands) × 1
- Wall/pole mounting bracket × 1
- Mount adapter plate × 1
- Long bolts × 4
- Screws, wall anchors, nuts, washers and rubber grommets (mounting hardware)
