- Free delivery in Accra and Tema
- Genuine Apple warranty & Support
- Sealed, genuine Apple stock
Ubiquiti
UniFi E7 Campus
An enterprise indoor/outdoor WiFi 7 access point for large spaces.
Only 5 left in Accra
₵10,199
Delivery or pickup
UniFi E7 Campus—
₵10,199
- Free delivery in Accra and TemaTracked to your door, with a delivery code on handover.
- Sealed, genuine Ubiquiti stockNever refurbished, never opened, serial on the box.
About the UniFi E7 Campus
Enterprise WiFi 7 for campuses, courtyards, warehouses and stadium concourses. A high-gain directional antenna covers about 465 m² and serves 1,000+ devices over three bands (6 GHz where local rules allow), with PRISM filtering to shut out interference.
It is weatherproof to IPX6, or IP67 with the included door kit, and mounts on a wall or pole. Uplinks at 10 GbE with a backup GbE port. Needs PoE++.
- PRISM RF filtering against interference
- 10 GbE uplink, PoE++ powered
Full specification
7 sectionsWiFi
- WiFi standard: WiFi 7 with 6 GHz support (tri-band 2.4 / 5 / 6 GHz)
- Spatial streams: 10
- MIMO: 6 GHz 4 x 4, 5 GHz 4 x 4, 2.4 GHz 2 x 2 (DL/UL MU-MIMO)
- Max. data rate: 6 GHz 11.5 Gbps (BW320); 5 GHz 8.6 Gbps (BW240); 2.4 GHz 688 Mbps (BW40)
Antennas and coverage
- Coverage area: 465 m² (5,000 ft²)
- Directional internal antennas: 6 GHz 12 dBi (90° x 50°); 5 GHz 12 dBi (100° x 55°); 2.4 GHz 9 dBi (90° x 80°)
- Max. client count: 1,000+
- PRISM RF filtering: Yes
Uplink and power
- Networking interface: (1) 10 GbE RJ45 port / (1) GbE RJ45 port
- Power method: PoE++
- Supported voltage range: 42.5–57V DC
- Max. power consumption: 44W
Mounting and weatherproofing
- Mounting: Wall, pole (mounts included); VESA (optional)
- Pole mount diameter: 25–63.5 mm (1–2.5")
- Weatherproofing: IPX6; IP67 with waterproof door kit (included)
- Ambient operating temperature: -30 to 60° C (-22 to 140° F)
Physical
- Dimensions: device 250 x 250 x 45.5 mm (9.8 x 9.8 x 1.8"); articulating mount ⌀104 x 149.4 mm
- Weight: device 2.2 kg (4.9 lb); with articulating mount 3.1 kg (6.8 lb)
You will also need
- A PoE++ (802.3bt) power source: a PoE++ (802.3bt) switch port or PoE++ (802.3bt) injector (not included)
- A UniFi gateway / Cloud Gateway or UniFi Network application (UniFi Network 9.0.114 or later) to adopt and manage it
- An Ethernet cable run to the mounting point (not included)
- A 10 GbE-capable switch port to use the full 10 GbE uplink
- Outdoor-rated (shielded) Ethernet cable for exposed runs (not included)
Good to know
- 6 GHz WiFi works only where local regulations allow it; elsewhere the device runs on its other bands.
In the box
- E7 Campus access point × 1
- Articulating wall/pole mount × 1
- Pole mount brackets × 2
- Mounting adapter plate × 1
- Waterproof (cable-gland) door kit × 1
- Pole bolts × 2
- Screws, wall anchors, nuts and washers (mounting hardware)
- Hex key × 1
