- Free delivery in Accra and Tema
- Genuine Apple warranty & Support
- Sealed, genuine Apple stock
Starlink
Starlink SPX to RJ45 Adapter Set (Gen 2)
Run your own Ethernet cable between a Gen 2 dish and its router.
Only 5 left in Accra
₵139
Delivery or pickup
Starlink SPX to RJ45 Adapter Set (Gen 2)—
₵139
- Free delivery in Accra and TemaTracked to your door, with a delivery code on handover.
- Sealed, genuine Starlink stockNever refurbished, never opened, serial on the box.
About the Starlink SPX to RJ45 Adapter Set (Gen 2)
A pair of adapters that let you replace Starlink's fixed cable with ordinary network cable. One plugs into the dish and gives a weatherproof socket outside; the other plugs into the router indoors. Run your own shielded CAT6 between them and you can put the dish on a roof or mast far from the router, or thread the cable through a wall without cutting the plug off.
They carry Starlink's power and data through, up to 1,200 Mbps. Buy the cable to length; it is not included.
- For the Gen 2 (rectangular dish) kit
- Cable not included
Full specification
7 sectionsElectrical
- Transmission rate: 1200 Mbps
- Voltage: 48 V (passes Starlink's PoE-style power through)
- Conductor: 24 AWG single-core bare copper, shielded, anti-aging jacket
- Ports: RJ45-1, RJ-2 (seller's spec-table wording)
- Battery: none
Connectors
- Dish side: right-angle SPX male plug to a round waterproof RJ45 female socket
- Router side: right-angle SPX male plug to a flat RJ45 female coupler
- Weatherproofing: screw-on waterproof barrel/gland that seals the outdoor RJ45 joint
- Materials: rubber and copper
Dimensions
- Router-side lead: 23.6 cm / 9.29 in overall
- Dish-side lead: 27.6 cm / 10.87 in overall
- Cable section of each lead: 20 cm +/- 3 cm
- Connector heads: 3.6 cm (RJ45 coupler) and 7.6 cm (waterproof socket)
- Stated size tolerance: +/- 3 cm
Compatibility
- Starlink generation: Gen 2 / V2 rectangular (Standard Actuated) dish and its router
- Cable to supply: CAT6 (Cat5e or better) shielded Ethernet, RJ45 terminated
Power in Ghana
- No power of its own; the adapters pass Starlink’s power through.
You will also need
- A Starlink Gen 2 / V2 rectangular (Standard Actuated) dish AND its Gen 2 router — the SPX connector shape is specific to that generation.
- The customer's own CAT6 (or Cat5e+) outdoor-rated Ethernet cable, cut to the length of the run and RJ45 terminated. Not supplied.
- No app, no hub, no SIM, no batteries. Starlink service subscription as normal.
Good to know
- The Ethernet cable that runs between the two adapters is not included.
In the box
- 1x dish-side adapter: right-angle SPX male to waterproof round RJ45 female
- 1x router-side adapter: right-angle SPX male to RJ45 female coupler
- 1x waterproof kit (screw-on barrel / gland for the outdoor RJ45 joint)
