• Free delivery in Accra and Tema
Chat
iVillageAfrica

Starlink

Starlink Pole Mount (Gen 3)

Mounts a Starlink Gen 3 dish on a pole, for a clear view of the sky.

Only 5 left in Accra

₵79

Delivery or pickup

Starlink Pole Mount (Gen 3)—
₵79
  • Free delivery in Accra and TemaTracked to your door, with a delivery code on handover.
  • Sealed, genuine Starlink stockNever refurbished, never opened, serial on the box.

About the Starlink Pole Mount (Gen 3)

Gets the dish up and out of the way. This adapter clamps a Starlink Gen 3 dish to any pole or pipe between 35 mm and 60 mm across, so it can go on a roof, a mast or a wall bracket instead of standing on the ground where trees and buildings block the sky.

It is moulded in ASA, the plastic used for outdoor fittings, and holds the dish at about 15°. Screws, a hex key and a sleeve that protects the pole are included.

  • For the Starlink Gen 3 (Standard) dish
  • Fits poles 35–60 mm across
  • Outdoor ASA plastic, sun and rain resistant
  • Screws and hex key included
  • Not for the older Gen 2 rectangular dish

Full specification

4 sections
Fitting
  • For: Starlink Gen 3 (Standard) dish with the Rev4 kickstand
  • Pole diameter: 35–60 mm (1.38–2.37 inches)
  • Tilt: holds the dish at about 15° for reception
  • Not for: the Gen 2 rectangular dish
Build
  • Material: ASA, an outdoor plastic that resists sun and rain
  • Colour: white
  • Size: 18.8 × 14.5 × 9.8 cm
  • Weight: 360 g
  • Fixing: two screws, with a TPU sleeve so the pole is not scratched
Power in Ghana
  • No power needed.
You will also need
  • A pole or pipe between 35 mm and 60 mm across
  • Your Starlink Gen 3 dish and its kickstand (the mount replaces the stand's footing, it does not replace the dish)

In the box

  • Pole mount adapter
  • TPU pole sleeve
  • Screws
  • Hex key
WhatsApp us
Starlink Pole Mount (Gen 3) | iVillage Africa